VIN 031302 to Vin A30644 - Non R Perf and Brembo

Relating to changing your XK8 or XKR FRONT brake discs there are a variety of Jaguar part numbers and choices in terms of genuine Jaguar, aftermarket and upgrade disc brake options. Here we have presented these by chassis breaks so you can clearly see the options available to help you make a decision on what discs to choose.

1. Genuine Jaguar Discs

FRONT DISCS - JLM20617 / C2C41250 - £153.15 / Pair

REAR DISCS - JLM20342 - £138.28 / Pair

xk8 and XKR JLM20617 C2C41250 Standard Disc

2. Quality British Made Replacement XK8 and XKR Brake Discs

FRONT DISCS - JLM20617R / C2C41250R - £78.75 / Pair

REAR DISCS - JLM20342R - £55.75 / Pair

JLM20617 C41250 Brake Discs

3. Quality British Made Replacement XK8 XKR and XJ8 Upgraded Brake Discs
JLM20617U / C2C41250U- GSD Style

FRONT DISCS - JLM20617U / C2C41250U - £225 / Pair

REAR DISCS - JLM20342U - £149 / Pair

JLM20617U C2C41250U Super Sport Disc - GSD Style

Super Sports Slotted and Dimpled Discs. Key features:

1. EBC Turbo Grooved and Dimpled Discs for cooler running
2. All EBC discs are British made and are precision machined in the UK.
3. Discs are made from high quality material to exacting standards and undergo extensive testing and rigorous quality control.
4. Gold anodised finish for an impressive look
5. Quality British Made Replacement XK8 XKR and XJ8 Upgraded Brake Discs - USR Spec

JLM20617U / C2C41250U- USR Style

FRONT DISCS - JLM20617U / C2C41250U - £220 / Pair

REAR DISCS - JLM20342U - £149 / Pair

JLM20617U C2C41250 Super Sports Disc - USD Spec

Super Quiet Slotted Brake Discs. Key features:

1. narrow profile slot pattern which helps cool brakes and de gas brakes under load and speed but eliminate air noise
2. maintain flat and parallel pad wear and avoid the record grooves or galling common with non slotted discs
3. these discs are coated with a black EPF finish that is wet spray tested to last 10 years leaving your discs looking like new for thousands of miles
4. ability to resist cracking common with through drilled discs and also eliminate the ridges common with through drilled versions. Such ridges extend 'pad bed in time' and the period where brakes are back up to optimum performance. These discs completely eliminate this problem. ALWAYS REPLACE PADS WHEN FITTING NEW DISCS !
5. Discs are British made by EBC

Please CONTACT DAVE ROCHE to confirm your requirements and to order.

XK8 and XKR Parts

305MM VIN 001246 to VIN 031302

Relating to changing your XK8 or XKR front brake discs there are a variety of Jaguar part numbers and choices in terms of genuine Jaguar, aftermarket and upgrade disc brake options. Here we have presented these by chassis breaks so you can clearly see the options available to help you make a decision on what discs to choose.

1.Genuine Jaguar XK8, XKR and XJ8 Brake Discs

FRONT DISCS - JLM20150 / C2C41249 - £141.75 / Pair

REAR DISCS - JLM20342 - £138.28 / Pair

JLM20150 C2C41249 Standard Genuine Jaguar Brake Disc

2. Quality British Made Replacement XK8 XKR and XJ8 Brake Discs 1996 to 1998

FRONT DISCS - JLM20150R / C2C41249R - £59.75 / Pair

REAR DISCS - JLM20342R - £55.75 / Pair

XK8 XKR XJ8 Brake Disc JLM20150R British Made Disc

3. Quality British Made Replacement XK8 XKR and XJ8 Upgraded Brake Discs 1996 to 1998
JLM20150U / C2C41249U- GSD Style

FRONT DISCS - JLM20150U / C2C41249U - £155 / Pair

REAR DISCS - JLM20342U - £149 / Pair

JLM1829 C2C41294U - Upgrade Disc GSD

Super Sports Slotted and Dimpled Discs. Key features:

1. EBC Turbo Grooved and Dimpled Discs for cooler running
2. All EBC discs are British made and are precision machined in the UK.
3. Discs are made from high quality material to exacting standards and undergo extensive testing and rigorous quality control.
5. Gold anodised finish for an impressive look

4. Quality British Made Replacement XK8 XKR and XJ8 Upgraded Brake Discs 1996 to 1998
JLM20150U / C2C41249U- USR Style

FRONT DISCS - JLM20150U / C2C41249U - £155 / Pair

REAR DISCS - JLM20342U - £149 / Pair

C2C41249U - Upgrade Discs for XK8 - USR Style

Super Quiet Slotted Brake Discs. Key features:

1. narrow profile slot pattern which helps cool brakes and de gas brakes under load and speed but eliminate air noise
2. maintain flat and parallel pad wear and avoid the record grooves or galling common with non slotted discs
3. these discs are coated with a black EPF finish that is wet spray tested to last 10 years leaving your discs looking like new for thousands of miles
4. ability to resist cracking common with through drilled discs and also eliminate the ridges common with through drilled versions. Such ridges extend 'pad bed in time' and the period where brakes are back up to optimum performance. These discs completely eliminate this problem. ALWAYS REPLACE PADS WHEN FITTING NEW DISCS !
5. Discs are British made by EBC

Please CONTACT DAVE ROCHE to confirm your requirements and to order.

XK8 and XKR Parts

XK8 Parts Article - Front Suspension Problems

XK8 and XKR front suspension

This is a must read if there is any knocking coming from the front wishbone area of your Jaguar XK8 or XKR.
CLICK HERE TO READ Front Suspension Problems Article

CONTACT DAVE AT XK8 PARTS NOW To discuss further or to order parts.

Jaguar XK8 and XKR Parts

As the Jaguar XK8 gets older it’s expected that the front suspension parts will become worn and require replacement. Typically wheel bearings, top and bottom wishbone bushes, springs, shock absorbers ball joints etc will all eventually require replacement.

XK8 Parts Review - Front Suspension / Subframe Problem Warning

However, if your car’s front suspension is making a knocking noise don’t necessarily assume it is caused by one of the above and fork out a pile of cash to replace one or more of these parts. A clonking sound from the front suspension can be a far more serious problem to resolve.

This could be due to the top wishbone bushes seizing to the steel fulcrum pin. The combined seized unit then wearing away at the all aluminium subframe of the car and creating an oval shaped pin hole. When this happens the wheel and the suspension become unstable and tend to float around with the excess play. This will obviously then manifest itself with a deterioration in handling and increased road (clonking) noise.

It is not hard to understand how this can happen when you look at Jaguar’s poor design of the top wishbone / bushes and fulcrum pin assembly and area. At each pin hole end, this is hollowed out and allows water, dirt and salt etc to ingress into the hole and corrode the bush and pin. No protection is provided for the exposed area or in fact Jaguar maintenance advice to periodically clean and protect the area with grease or Waxoyl.

The top front and rear bushes are designed to self lubricate and rotate as required around the fulcrum pin. However, when these become corroded, the combined seized unit then wears way at the alluminium subframe. To make things worse, an electrolytic reaction can take place caused by the steel pin passing through the aluminium subframe and the steel inserts of the bushes.

If the subframe wear is excessive, this may require complete replacement with either a new or good used subframe. A new subframe will be well over £1500 to replace !!. A much lower cost solution would be for an experience motor engineer to add new inserts into the subframe and then replace the pin and two bushes parts. At the time of adding this post to the website I don’t know how successful this latter approach has been.

I have checked my car for play and corrosion in this area and all seems to be working fine. I have fully protected the bushes, pin and general area with Waxoyl. If I do hear a knocking sound from the front suspension, then this will be the first area that I will check !.

Finally, if your having work done to remove the XK8 top wishbone assembly parts then maybe it’s more cost-effective to replace all the bushes and ball joints even springs and shock absorbers at the same time as these will inevitably have to be replaced at some point in the future and the finished job will contribute to improved handling, piece of mind and enjoyment of your car.

To enquire / order front suspension parts CONTACT US AT XK8 PARTS NOW.

For the Jaguar XK8 and XKR Front Suspension Parts Diagram and parts availability, CLICK HERE

XK8 and XKR Parts

XK8 Parts Review Front Suspension Layout and Parts

The front suspension of an XK8 / XKR is prone to a number of problems. We have already discussed in a previous post that wheel bearings are subject to early wear at around 30K miles. If there is play in the suspension, then this can be attributable to worn bushes. One problem that may arise is due to the top wishbone bushes seizing to the steel fulcrum pin. The combined seized unit then wearing away at the all alloy subframe. Once the subframe is worn, this is very expensive to replace. It is recommended to change the pin and top bushes and then protect the area with a product such as Waxoyl to prevent corrosion. Also, as the mileage of your car increases, then this may result in worn shock absorbers or broken springs. All these parts can be reviewed and purchased via www.jaguarpartsdb.com

Click HERE to view XK8 / XKR Front Suspension Parts at JaguarPartsDB

Copyright XK8 and XKR Parts - www.xk8-parts.com