XK8 Parts Review - Programme your Key Fob

If your key fob has been lost, failed or is just looking worn out and the XK8 part needs to be replaced then there is a procedure to be followed to programme the key fob for your XK8 / XKR car. A typical Jaguar Dealership will charge you for the programming procedure, possibly up to half an hour of time. However, the procedure is fairly straightforward as follows:

Pull the headlamp flasher stalk towards you and at the same time, turn the ignition key to position one. Then release the stalk and flash the lamps five times. Press any button on the fob and then turn off the ignition and the fob should be programmed. After five flashes, you should hear a noise from the security sounder and then also a bleep after you press each key on the fob.

You may also be interested in our XK8 / XKR Parts Review on the windows reset procedure - Click Here

Click Here to contact Dave Roche @ XK8 Parts if you need a replacement Key Fob or require any further details.

Jaguar XK8 and XKR Parts

XK8 Parts Review - Recommended CTEK Battery Charger

Many XK8 and XKR owners take their cars off the road in winter months and they can often be left for weeks without being started. In our post on the XK8 / XKR window reset procedure (click here), we reported on how easily the battery can become discharged when left for a time which will then require a battery recharge, the resetting of windows, radio code etc. Also, the constant drain can permantly damage the Jaguar model 017 battery.

It’s recommended to purchase one of the latest battery maintenance chargers to avoid these problems occurring and allow you to start your car any time with a fully charged battery. One such product recommended by other XK8 and XKR owners in the forums is the CTEK Multi XS 3600. This is a switch mode charger with pulse maintenance which uses state-of-the-art technology with its four step fully automatic charging cycle IUoUp. You can use the MULTI XS 3600 to charge a range of batteries, from small 1.2Ah to large 120Ah. CTEK chargers can be connected for months without harm to your battery and vehicle. Charging can normally take place while the battery is still on the vehicle. A very useful tool for any home, garage or workplace.

CTEK chargers can be connected for long periods of time in protective pulse maintenance mode without any damage to the battery. The chargers are safe for use with all electronics so no disconnection from the vehicle is necessary. Also the chargers are spark proof, short circuit proof and reverse polarity protected. CTEK can charge drained or sulphated batteries even if the mains voltage is as low as 170 volts. Fitted with a UK Plug so there is no need for an adapter. Note for European customers, a Euro Adaptor can be provided.

XK8 and XKR Parts

This boot spoiler is a great product to update the lines of your XK8 to match the XKR model style. It is made from very light hand crafted fiberglass and can be fitted in minutes. It will arrive in primer ready for painting or for an additional charge, this can be professionally painted if the paint code is supplied.

XK8 Parts Review - XKR 'Look' Boot Spoiler

The spoiler can be fitted in minutes being placed directly on to the boot with pre-mounted double-sided 3M automotive tape (supplied) with no need for drilling.

XK8 and XKR Parts

Let’s face it, the front of a Jaguar XK8 / XKR looks pretty impressive in it’s standard format. But a problem with the standard number plate plinth is that it partly obstructs the grill aperture. The front of the car looks much better if the number plate is positioned below the grill. This is a great improvement to the existing looks and is definitely recommended if you are planning to fit a mesh grill to the car which will really improve the look of your car further. See our mesh grill reviews.

The kits available on the market lower the existing number plate and plinth below your grille. The ones we have looked at fit XK8 and XKR models up to 2003 model year. The parts kit consists of two aluminium brackets in an anodised black finish to match the plinth, plus provision of all the required fixings and instructions.

www.xk8-parts.com Review - New Number Plate Plinth kit for XK8 and XKR Cars

This will really enhance the look of your Jaguar XK8 showing off the grill aperture to it’s best. This item can also be used on number plates for the United States and Canada. We understand that the plinth can also be painted to match the colour of your car for a small additional fee.

www.xk8-parts.com - Recommended Products

XK8 and XKR Parts

XK8 / XKR Drivebelt Configuration

Noisy accessory drivebelts seem to have become a common Jaguar V8 trait in recent years. This can be due to the general ageing of the belt but also to the belt having been soaked in coolant. Also check the teeth on the inner side of the belt for general deterioration. In my case, I removed the cap of the header tank too early and the long life coolant sprayed all over the engine compartment and onto the drivebelt. Coolant can also soak the belt if you are changing the water pump and / or the thermostat. The only reliable fix is to replace the belt together with the tensioner and a revised idler pulley. This is recommended to ensure a quiet operation. The work is quite straightforward and can all be done as a job on its own or as part of a water pump / thermostat change or general cooling system overhaul.

When purchasing the accessory belt, we recommend either a good quality replacement belt or the genuine Jaguar XK8 part. If an aftermarket belt is used, it must be exactly the same length or the wear indicator built into the tensioner will not work properly.

CLICK HERE if you want to check out and order one of our Jaguar V8 engine drivebelt system service kits.

CLICK HERE TO CONTACT DAVE @ XK8 PARTS FOR THE BEST PRICES ON DRIVEBELTS INCLUDING THE XKR SUPERCHARGER DRIVEBELTS AND ASSOCIATED SYSTEM PARTS

XK8 and XKR Parts