• Home
  • About
  • Privacy Policy
  • Vehicle Identification
  • XK8 / XKR Gallery
  • Contact Us
  • Links Page

Jaguar XK8 and XKR Parts and Accessories

The definitive source for Jaguar XK8 and XKR parts and accessories

  • website named desire
  • oomph

XK8 Parts Review: Replacing XK8 / XKR Worn Front Wheel Bearings

October 9th, 2009  |  Published in Front Suspension / Wheels  |  2 Comments

Changing front wheel bearing parts on many cars can be a fairly straight forward job but changing the bearing parts on an XK8 / XKR can be challenging and a special tool will be required to do the job. There is nothing complex about the XK8 wheel bearing as such as they are a standard one piece bearing together with 2 circlips that retain the bearing in the housing.

Jaguar XK8 - XKR Front Wheel Bearing Part

Jaguar XK8 - XKR Front Wheel Bearing Part

ABS Rotor Nut for XK8 XKR Wheel Bearing Removal

ABS Rotor Nut for XK8 XKR Wheel Bearing Removal

The XK8 / XKR bearings are not noted for their longevity with car mileages between 30000 and 40000 miles typically requiring front wheel bearing changes. Indicative signs of worn wheel bearings are the constant drone of the bearings which get worse if you turn the steering wheel and generally the rough feel when driving the car. At the first signs of a worn wheel bearing, they should be changed as soon as possible to avoid additional work (and costs) in the future. One of the first problems to be encountered is the removal of the bottom ball joint which will be tight and often has to be cut off. Removal of the calliper and disc is usually straightforward. However, removal of the ABS rotor nut is required and this requires a special tool (rotor nut socket) to undo it without causing expensive damage. The rotor nut has a series of castellations on it for the wheel speed sensor to pick up. The sensor has to be removed which is also expensive if damaged.

With the hub off the car and suitably retained in a vice, the next challenge is to remove the rotor nut which requires considerable force requiring a very large torsion bar lever to move it. Once the nut is undone, two special circlips need to be removed and then the bearing has to be pressed out of it’s housing. A hydraulic press is best for this and ideally a cradle to secure it. Best use your local auto engineer / garage for help here. Refitting is the reverse of the above, but hopefully now you will have a much quieter XK8 / XKR and overall improved driving feel.

Latest Jaguar XK8 and XKR Parts Availability

    No items matching your keywords were found.

    Copywright: XK8 and XKR Parts

Responses

Feed Trackback Address
  1. Polprav says:

    October 23rd, 2009 at 12:56 pm (#)

    Hello from Russia!
    Can I quote a post in your blog with the link to you?

  2. admin says:

    October 26th, 2009 at 11:19 am (#)

    yes of course no problem thank you!

Leave a Response

XK8 / XKR Enthusiasts Club

archives

categories

  • Accessories
  • Automatic Transmissions
  • Body Styling
  • Books
  • Car Covers
  • Cooling System
  • Drivebelts
  • Electrical
  • Engines
  • Exhaust System – Performance
  • Exhaust System – Standard
  • Front Suspension / Wheels
  • Hood / Soft Top
  • JaguarPartsDB News
  • Oils / Lubricants
  • Rear Suspension
  • Troubleshooting
  • XK8 / XKR Gift Selection

pages

  • About
  • Contact Us
  • Links Page
  • Privacy Policy
  • Vehicle Identification
  • XK8 / XKR Gallery




©2010 Jaguar XK8 and XKR Parts and Accessories
Powered by WordPress using the Gridline Lite theme by Graph Paper Press.